January, 2005 - New FastTrac™ Cable Tray Added to Cable Pathway Product Line | Chatsworth Products

 

FastTrac™ Cable Tray Added to Cable Pathway Offering 

CPI Adds FastTrac Cable Tray, Cable Runway Pathway Divider and PatchRack For CPI Cable Runway to Product Line 

 

WESTLAKE VILLAGE, Calif. – January 10, 2005 – Chatsworth Products, Inc. (CPI), a 100% employee-owned leading manufacturer of structural support systems for computer and communications networks, expands its Cable Pathway Solutions with the addition of a new wire mesh pathway product, FastTrac™ Cable Tray, the ideal solution for overhead horizontal cable distribution.

FastTrac Cable Tray installs quickly and easily, using a unique system of supports that eliminate the need to cut and form every transition. The ends of the tray are turned down to form fingers that drop in to pre-punched openings on FastTrac supports. This feature not only eliminates the need to cut and form every transition, but also holds the tray in place while it is spliced, bonded and secured into place. Supports include a new type of ceiling support, the Intersect Support Plate, which allows quick drop in construction of L-, T-, X- or Y-shaped intersections.

Use FastTrac to provide continuous support and protection for large quantities of network cables in the ceiling, under a raised floor, or along a wall. The tray can be used in a plenum space, and is UL Classified for use as an equipment-grounding conductor. A complete line of cable management accessories is available for the FastTrac Cable Tray including Bend Radius, Radius Drop, and Tray Bottom, Divider and Cover.

In addition to the FastTrac Cable Tray, CPI introduces two additional pathway products for use on CPI’s Universal, TELCO and UL Listed Runway.

Cable Runway Pathway Dividersare cable spools that separate cables into individual pathways for better organization of cables. Separate cables according to media type or destination to improve connectivity and to simplify the removal or addition of new cable.

The PatchRack For CPI Cable Runway is a unique, miniature rack that attaches above or below cable runway in order to provide additional mounting options outside of existing racks or cabinets. Available in four or eight RMU, the Patch Panel Rack holds up to 60 pounds of patch panels or other interconnect equipment. Patch Panel Rack can be oriented parallel or perpendicular to cable runway to align with the front or side of a rack or cabinet. It can also be adjusted front, back, right or left to align with cable openings in the top of the rack or cabinet. Use Cable Runway Patch Panel Rack to support zone cabling in the data center.

Find more information about these and other cable pathway systems. 

 FastTrac Family           FastTrac Accessories 
FastTrac Cable Tray can be cut and formed into smooth vertical and horizontal turns without special fittings. FastTrac Supports are slotted so that the tray drops into the support quickly and easily.    A complete line of accessories are available for the FastTrac Cable Tray, including a Divider, Cover, Radius Bend, Installation Tools and more. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Patch Panel Rack           

Cable Runway Pathway Dividers 

The PatchRack is a miniature rack that attaches to runway to provide additional mounting options out side of the rack or cabinet.    Cable Runway Dividers separate cables into individual pathways for better cable organization. 
About Chatsworth Products 
At Chatsworth Products (CPI), it is our mission to address today’s critical IT infrastructure needs with products and services that protect your ever-growing investment in information and communication technology. We act as your business partner and are uniquely prepared to respond to your specific requirements with global availability and rapid product customization that will give you a competitive advantage. At CPI, our passion works for you. With over two decades of engineering innovative IT physical layer solutions for the Fortune 500 and multinational corporations, CPI can respond to your business requirements with unequaled application expertise, customer service and technical support, as well as a global network of industry-leading distributors. Headquartered in the United States, CPI operates from multiple sites worldwide, including offices in Mexico, Canada, China, the United Arab Emirates and the United Kingdom. CPI’s manufacturing facilities are located in the United States, Asia and Europe.

CPI is listed with the General Services Administration (GSA) under Federal Supply Schedule IT 70. Products are also available through GSA Advantage and through Government Wide Acquisition Contracts (GWACs), including GSA Connections and NITAAC-ECS III (www.chatsworth.com/gov).

More Information
www.chatsworth.com
info@chatsworth.com
800-834-4969

Media Contact
Shannon Erdley
Public Relations Specialist
serdley@chatsworth.com
252-635-4264
©2017 Chatsworth Products, Inc. All rights reserved. Chatsworth Products, Clik-Nut, CPI, CPI Passive Cooling, CUBE-iT PLUS, eConnect, Evolution, GlobalFrame, MegaFrame, OnTrac, QuadraRack, RMR, Saf-T-Grip, SeismicFrame, SlimFrame, TeraFrame and Velocity are federally registered trademarks of Chatsworth Products. EuroFrame, Motive, Secure Array and Simply Efficient are trademarks of Chatsworth Products. All other trademarks belong to their respective companies. 
10/19/2017 7:16:18 AM