As data center equipment densities continue to increase, so does the thermal management challenge for operations and facilities managers. Airflow distribution within the data center has a significant impact on the thermal environment. Chatsworth Products offers both active and passive cooling solutions to manage airflow within your enclosure.
These accessories include everything from airflow directors, solid top, bottom and side paneling, snap-in filler panels to seal off unused rack-mount unit space, raised floor grommets, air dam kits, and a variety of fan kits as well as a filtered air ventilation kit for select cabinets. Together, these thermal management accessories help ensure optimal data center cooling, which results in energy savings for your installation.
Block airflow through open rack-mount spaces to help keep hot air at the back of the cabinet. Panels snap into square-punched equipment rails. No tools required!
Air Dam blocks airflow around the sides and top of the equipment mounting space so cold air passes through equipment and hot air does not recirculate around equipment.
Vertical Exhaust Duct attaches to the top of the cabinet to provide a sealed pathway for hot air from the top of the cabinet to an overhead drop ceiling as part of a closed hot air return.
Side Panel With Brush Sealed Cable Openings feature multiple brush sealed cable openings that allow cables to enter the side of the cabinet while containing exhaust air within each cabinet.
Bay Seal Kit is only used with 23.6”W (600 mm) cabinets when the cabinets are bayed to align with 24”W (610 mm) floor tiles. The bay seal kit fills the small gaps left between cabinets.
Raised Floor Grommet features a dual-layer brush with an integrated EPDM membrane that forms a superior seal around cable bundles. Raised Floor Grommets prevent airflow from escaping through cable access holes in raised floor environments — significantly increasing cooling effectiveness in the data center.
Cable Port Brush Kit is a pair of snap on brush covers that can be used to replace the plastic grommets included with the top, bottom and side panels to form a better seal for cable openings.
Use with Snap-In Filler Panels to block airflow around the top, bottom and sides of equipment.
For additional ventilation for MegaFrame cabinets placed outside of the traditional data center environment.
Actively removes of hot air from the rear of the cabinet.
For use with 30"D (760 mm) MegaFrame Cabinets. Attaches to bottom panel tot filter dust and provide ventilation.
Metal Filler Panels for controlling airflow by filling empty spaces between rack-mounted equipment.
U.S. and Canada: 1-800-834-4969
© 2017 Chatsworth Products