Accessories

To truly make the most of your Chatsworth Products Cabinet System Solution, CPI provides a variety of value-added accessories to complement its functionality and ease of use.
Resources
Browse Accessories (0 Products)
Air Dam blocks airflow around the sides and top of the equipment mounting space, so conditioned air passes through equipment and exhaust air does not recirculate around equipment. Configure with cabinet or available separately as an accessory.
Starting at $278.04 USD MSRP
Air Director is an angled panel used at the back of cabinets for higher heat load applications with Vertical Exhaust Duct top panels to guide exhaust air toward the top of the cabinet. Configure with cabinet or available separately as an accessory.
8 options
Starting at $213.38 USD MSRP
Baying Bracket Kit for ZetaFrame® Cabinet
1 option
Starting at $20.49 USD MSRP
Creates simple, vertical pathways for small cable bundles
24 options
Starting at $87.31 USD MSRP
Caster Kit for ZetaFrame® Cabinet; Includes 2 Fixed Casters and 2 Swivel Casters
1 option
Starting at $246.80 USD MSRP
Double Perforated Metal Rear Door for ZetaFrame® Cabinet
32 options
Starting at $881.55 USD MSRP
Set of (8) brush covers that conceal cable openings in the equipment mounting rails to block airflow around equipment. Allows for quick cable installation through mounting rails while maintaining a seal
2 options
Starting at $131.48 USD MSRP
Set of (8) flexible plastic grommets that cover cable openings in the equipment mounting rails to block airflow around equipment.
2 options
Starting at $90.54 USD MSRP
Floor Mounting Bracket Kit For ZetaFrame®; Zinc Plated
1 option
Starting at $90.54 USD MSRP
Front-to-Rear Cable Manager attaches to the back of equipment mounting rails wherever there are cable openings, creating a cable pathway between front and rear rails.
6 options
Starting at $145.49 USD MSRP
Attach eConnect® PDUs to the cabinet.
16 options
Starting at $87.31 USD MSRP
Attach eConnect® PDUs to the cabinet.
16 options
Starting at $70.07 USD MSRP
Ground Block Kit for ZetaFrame® Cabinet
1 option
Starting at $31.26 USD MSRP
Latch Kit for Double Perforated Metal Rear Door for ZetaFrame® Cabinet
4 options
Starting at $187.53 USD MSRP
Place at the bottom of cabinets to seal the space between the bottom of the cabinet and the floor when leveling feet or casters are in use. Ideal for aisle containment applications. Compatible with ZetaFrame® Cabinet
18 options
Starting at $122.86 USD MSRP
Latch Kit for Single Perforated Metal Front Door for ZetaFrame® Cabinet
1 option
Starting at $74.38 USD MSRP
Latch Kit for Single Solid Metal Rear Door with Seal for ZetaFrame® Cabinet
4 options
Starting at $209.07 USD MSRP
Leveling Feet Kit for ZetaFrame® Cabinet, Four each, Zinc
1 option
Starting at $63.60 USD MSRP

To optimize cooling performance in your facility, you must isolate conditioned and exhaust air, guide conditioned air to equipment and remove exhaust air from equipment.

40 options
Starting at $308.23 USD MSRP
To optimize cooling performance in your facility, you must isolate conditioned and exhaust air, guide conditioned air to equipment and remove exhaust air from equipment.
40 options
Starting at $480.66 USD MSRP
Single Perforated Metal Front Door for ZetaFrame® Cabinet
32 options
Starting at $536.69 USD MSRP
Single Solid Metal Rear Door with Seal for ZetaFrame® Cabinet
32 options
Starting at $536.69 USD MSRP
Standard PDU Bracket Kit for ZetaFrame® Cabinet
1 option
Starting at $74.37 USD MSRP
Top Panel with Grommets for  ZetaFrame® Cabinet
40 options
Starting at $258.66 USD MSRP
Keep network cables separate and organized using the following cable management accessories.
56 options
Starting at $123.95 USD MSRP
Vertical Exhaust Duct attaches to the top of the cabinet to provide a sealed pathway for exhaust air from the top of the cabinet to an overhead drop ceiling as part of a closed hot air return
24 options
Starting at $737.15 USD MSRP

Clik-Nut® Hardware Kit can be used anywhere along the rack panel surface when mounting, removing or repositioning IT equipment. 

Request Free Sample​

18 options
Starting at $41.15 USD MSRP

Snap-In Filler Panel by Chatsworth Products (CPI) greatly reduces bypass airflow and blocks recirculation of hot exhaust air from the back of equipment to the front of equipment, helping to improve on cooling costs.

24 options
Starting at $18.96 USD MSRP

For airflow control and/or equipment mounting, fill empty spaces between mounted equipment.

192 options
Starting at $28.07 USD MSRP

CPI's Raised Floor Grommets provide a reliable seal around cable bundles. The rectangular grommet features a dual-layer brush with an integrated EPDM membrane for a superior seal. The Round grommet option offers a cabling solution in limited spaces.

2 options
Starting at $70.85 USD MSRP

Additional brackets used to support Raised Floor Enclosures from access floor support pedestals. Kit includes four brackets.

1 option
Starting at $137.03 USD MSRP

Air Dam blocks airflow around the sides and top of the equipment mounting space in Z4-Series SeismicFrame® Cabinets, so cold air passes through equipment, and hot air does not recirculate around equipment.

8 options
Starting at $337.80 USD MSRP

Cable Lashing Bracket creates a simple, separate vertical pathway for a small bundle of cables and has multiple slots for CPI Saf-T-Grip® Straps or tie wraps to secure cables to the bracket. 

4 options
Starting at $105.90 USD MSRP

Ring Cable Manager is independent of the equipment mounting rails, creating a separate vertical pathway for cables and includes plastic cable rings to organize cables. For use with Z4-Series SeismicFrame® Cabinets.

8 options
Starting at $205.51 USD MSRP

Full Height PDU Bracket supports two vertical PDUs side-by-side and has multiple slots for CPI Saf-T-Grip® Straps or tie wraps to secure cords to the bracket. For use with Z4-Series SeismicFrame® Cabinets.

8 options
Starting at $85.86 USD MSRP

Front-to-Rear Cable Manger attaches to the back of equipment mounting rails in Z4-Series SeismicFrame® Cabinets creating a front-to-rear pathway between the front and rear mounting rails for cables.

2 options
Starting at $178.98 USD MSRP

Optional cover when rectangular knockout on the rear panel is removed

1 option
Starting at $61.02 USD MSRP
Use with equipment that needs front and rear support
7 options
Starting at $98.94 USD MSRP
For use on desktops or floor when not installed on a wall
1 option
Starting at $37.67 USD MSRP
Replacement doors for CUBE-iT™ Wall-Mount Cabinet
12 options
Starting at $298.41 USD MSRP

Attaches to the rear of the equipment mounting rails

2 options
Starting at $53.02 USD MSRP

Light attaches to the bottom, top or side of the CUBE-iT® Cabinet and provides 5W of LED light.

1 option
Starting at $115.40 USD MSRP
Vertical Lashing Bracket for CUBE-iT Cabinets provides multiple point for premise cables.
10 options
Starting at $55.50 USD MSRP
Attaches to the outside edge of equipment rails
3 options
Starting at $88.33 USD MSRP

Low-decibel (31 dB), dual-fan option provides quiet operation while keeping active equipment cool

2 options
Starting at $231.44 USD MSRP

Compatible with Low-Decibel Dual-Fan and Standard Fan kits

1 option
Starting at $37.67 USD MSRP

Pressurizes interior of the cabinet, forcing warm air out of open vents

2 options
Starting at $161.35 USD MSRP

Attaches to rear panel on CUBE-iT™ Cabinets. Creates a 19" EIA x 2U vertical rack-mount space.

1 option
Starting at $84.55 USD MSRP

The Fiber Slack Manager Panel provides both fiber slack management and a mounting surface for a small fiber manager. Secured under the outermost mounting units, the panel takes up no mounting space within the cabinet.

1 option
Starting at $166.75 USD MSRP

The ThinLine II Intelligent Fan Kit uses a solid state temperature control to vary fan speed from an ultra quiet low speed to low air temperature through increasingly higher speeds as temperature rises.

2 options
Starting at $159.08 USD MSRP

Air Dam blocks airflow around the sides and top of the equipment mounting space, so cold air passes through equipment and hot air does not recirculate around equipment in the GF-Series GlobalFrame Gen 2 or F-Series TeraFrame Gen 3 Cabinets.

138 options
Starting at $271.26 USD MSRP

Cable Lashing Manager creates a simple vertical pathway for multiple cable bundles and has multiple attachment points for securing cables using CPI Saf-T-Grip® Straps or zip ties in N-Series TeraFrame Gen 3 Network Cabinets.

44 options
Starting at $146.08 USD MSRP

Corner cushions cover the exposed leading edges of racks for added protection.

1 option
Starting at $29.77 USD MSRP

Cable Port Brush Kit is a pair of snap on brush covers that can be used to replace the plastic grommets included with the top, bottom and side panels to form a better seal for cable openings.

1 option
Starting at $122.83 USD MSRP

Set of plastic grommets that cover cable openings in the equipment mounting rails in the wider cabinets to block airflow around equipment.

1 option
Starting at $126.68 USD MSRP

Bay Seal Kit is only used with 23.6”W (600 mm) GF-Series GlobalFrame Gen 2 or F-Series TeraFrame Gen 3 Cabinets when the cabinets are bayed to align with 24”W (610 mm) floor tiles. The bay seal kit fills the small gaps left between cabinets

11 options
Starting at $139.41 USD MSRP

Cable Lashing Bracket creates a simple, separate vertical pathway for a small bundle of cables and has multiple slots for CPI Saf-T-Grip® Straps or tie wraps to secure cables to the bracket.

44 options
Starting at $105.90 USD MSRP

Replacement Fan Kit & Junction Box for  2' x 2' Ceiling Enclosure (13812-001) or add to Ceiling Enclosure for Wiring Blocks (13812-003) and Ceiling Enclosure for Patch Panels (13812-002) to support active components.

1 option
Starting at $298.16 USD MSRP

CPI provides a variety of replacement parts for zone cabling enclosures. Chrome Lock Kits and Spare Keys enhance security of the Ceiling Enclosure, replacing existing turn locks.

1 option
Starting at $30.66 USD MSRP

Specially designed to support heavy equipment. 2U x 19”W x 26”D (660 mm) sliding shelf, extends 24” (610 mm), adjusts between 20” and 34”
(510 mm and 860 mm) mounting depth. Supports up to 300 lb (136.1 kg).

4 options
Starting at $811.74 USD MSRP

Finger Cable Manager attaches to the equipment mounting rail creating a pathway for cables next to the rail, and includes plastic T-shaped cable guides (fingers) that organize cables by rack-mount space (U). Two depths are available.

122 options
Starting at $242.58 USD MSRP

Use fixed shelves to support equipment without rack-mounted brackets such as modems, CPUs, small power supplies and monitors.

24 options
Starting at $176.83 USD MSRP

Replacement plenum rated foam kits for use with Raised Floor and Ceiling Zone Enclosures

3 options
Starting at $93.25 USD MSRP

Full Height Dual PDU Bracket supports two vertical PDUs side-by-side and has multiple slots for CPI Saf-T-Grip® Straps or tie wraps to secure cords to the bracket. Two sizes available. For use with GF-Series GlobalFrame Gen 2 or F-Series TeraFrame<

44 options
Starting at $85.86 USD MSRP

Front-to-Rear Cable Manager attaches to the back of equipment mounting rails creating a front-to-rear pathway between the front and rear mounting rails for cables. For use with GF-Series GlobalFrame Gen 2 or F-Series TeraFrame Gen 3 Cabinets.

2 options
Starting at $178.98 USD MSRP

Convenient cabinet labeling provided with a dedicated holder to provide cabinet ID and IP address. Package of 12, Black

1 option
Starting at $75.56 USD MSRP

5 mm Hex Ball Driver Tool, 12"L (300 mm), Each

1 option
Starting at $23.69 USD MSRP

Lockable Storage Drawer keeps backup media, software, manuals, laptops, test equipment and extra patch cords in close proximity to where they are typically used within a rack or cabinet.

24 options
Starting at $509.84 USD MSRP

This unique telescoping design delivers between 20" and 36" of continuous support for up to 100 pounds of equipment in less than 1 RMU of rack-mount space!

8 options
Starting at $132.04 USD MSRP

Radius Drop attaches to the top of the N-Series TeraFrame Gen 3 Network Cabinet and provides a smooth curved support where cables exit or enter the cable management space along the sides of the cabinet.

2 options
Starting at $54.72 USD MSRP

Ring Cable Manager is independent of the cabinet equipment mounting rails creating a separate vertical pathway for cables and includes plastic cable rings to organize cables. For use with GF-Series GlobalFrame® Gen 2, N-Series TeraFrame® Gen 3 and  F-Series TeraFrame® Gen 3 Cabinets.

132 options
Starting at $205.51 USD MSRP

Cover unused holes in the frame for hinges and installation brackets to prevent bypass airflow.

2 options
Starting at $75.31 USD MSRP

Side Panel With Brush Sealed Cable Openings feature multiple brush sealed cable openings that allow cables to enter the side of the cabinet while containing exhaust air within each cabinet.

748 options
Starting at $623.84 USD MSRP

Side Panel With Grommet Sealed Cable Openings feature multiple grommet sealed cable openings that allow cables to enter the side of the cabinet while containing exhaust air within each cabinet.

748 options
Starting at $581.46 USD MSRP

These specially designed shelves are suitable for applications where there is a need to access installed equipment for maintenance, upgrading, cleaning, etc.

16 options
Starting at $577.23 USD MSRP

Square-Punched Hardware Kits; Several sizes available; M-6, 10-32, or 12-24; Package of 25

3 options
Starting at $57.91 USD MSRP

Telescoping Cable Manager attaches to the sides of the front and rear equipment mounting rail in the N-Series TeraFrame Gen 3 Network Cabinet providing a front-to-rear or vertical pathway for cables along the side of equipment.

4 options
Starting at $146.08 USD MSRP

Vertical Exhaust Duct attaches to the top of the GF-Series GlobalFrame® Gen 2 or F-Series TeraFrame® Gen 3 Cabinets to provide a sealed pathway for hot air from the top of the cabinet

18 options
Starting at $740.63 USD MSRP

Vertical PDU Mounting Bracket Kit used to attach Vertical PDUs to F-Series TeraFrame Gen 3 Cabinet System or GF-Series Gen 2 Cabinet System

1 option
Starting at $126.04 USD MSRP

Kit contains four individual label packs, enough for four racks and four cabinets. Labels are constructed of 1/2' W (10 mm) durable polyester film with adhesive backing.

2 options
Starting at $165.69 USD MSRP

Fits any 19" or 23" EIA rack or cabinet. The 5 Watt LED Light Kit can be mounted in various orientations to direct additional illumination where it is most needed.

2 options
Starting at $189.42 USD MSRP

Air Director is an angled panel used at the back of cabinets with Vertical Exhaust Duct top panels to guide hot air towards the top of the cabinet.

2 options
Starting at $202.91 USD MSRP

Bottom Panel seals the bottom of the F-Series TeraFrame Gen 3 Cabinets to contain and control airflow in cabinets that are elevated on casters or leveling feet.

8 options
Starting at $268.68 USD MSRP

Bottom Panel seals the bottom of the F-Series TeraFrame Gen 3 Cabinets to contain and control airflow in cabinets that are elevated on casters or leveling feet.

6 options
Starting at $268.68 USD MSRP

Vertically split design uses minimal aisle space when opened, and provides security and airflow for rack-mount equipment in the cabinet when closed. 

21 options
Starting at $932.91 USD MSRP
Replacement doors for CUBE-iT™ Wall-Mount Floor-Supported Cabinet.
8 options
Starting at $556.14 USD MSRP
Use the Rack-Mount Cable Shelf in any 19”W Cabinet equipped with an Air Dam Kit to provide a front-to-rear pathway for cables. Cables pass through brush-sealed ports along the front of the shelf. 
1 option
Starting at $230.20 USD MSRP