Software

The below software supports a variety of CPI's power and electronic products. Select the appropriate software link below. For assistance please contact our Technical Support Team.
 

eConnect® Power Distribution Unit (PDU)
File	Release Date	Manual / Notes
Firmware 5.1.731	03-02-2020	Use only with individual eConnect units with eConnect® Controller 4 (MCM4). This firmware revision is intended for individual eConnect PDUs with an eConnect Controller 4 (MCM4) and can be used in a Secure Array with eConnects that have eConnect Controller 3 (MCM3 controller) or eConnect Controller 2 (MCM2 controller) after those controllers are updated to firmware revision 4.11.731 or later. PDUs with this firmware revision cannot be used in Secure Array with PDUs that have an eConnect Controller 1 (MCM1 controller).  Please read Release Notes for details.
Firmware 4.4.235	03-02-2020	Use only with individual eConnect units with MCM3 or MCM2 controller; or if all units within Secure Array® have MCM3 or MCM2 controllers.This firmware revision is intended for individual eConnect PDUs with an eConnect Controller 3 (MCM3 controller) or eConnect Controller 2 (MCM2 controller) or eConnect PDUs within a Secure Array®, all of which have an MCM3 or MCM2 controller. Do not use this firmware version, if any of the PDUs within the Secure Array have an eConnect Controller 1 (MCM1 controller).  Please read Release Notes for details.
Command Line Interface User Guide	03-02-2020	Use only with eConnect units with eConnect Controller 4 (MCM4) and firmware revision 5.1.731 or later. Requires a serial console cord to connect a computer to the PDU. Order a serial console separately.
Firmware 3.1.239 / 2.23.175	8-03-2016	Use only with individual eConnect units with MCM1 controller with existing 2.x.xxx firmware rev; or if any units within Secure Array have MCM1 controller with 2.x.xxx firmware rev.  This firmware version does not support integrated eConnect EAC. Please read Release Notes for details.
RESTful API User Guide	12-20-2018
SNMP MIB File	03-11-2020

 

RFID Electronic Lock Kit
File	Release Date	Manual / Notes
Firmware 5.1.731	03-02-2020	Please read Release Notes for details.
Command Line Interface User Guide	30-02-2020	Use only with eConnect units with eConnect Controller 4 (MCM4) and firmware revision 5.1.731 or later. Requires a serial console cord to connect a computer to the PDU. Order a serial console separately.
SNMP MIB File	03-11-2020

Networked Electronic Access Control (EAC)
File	Release Date	Manual / Notes
Firmware 4.4.253	03-02-2020	Please read Release Notes for details.
SNMP MIB File	03-11-2020

 

Additional Power Distribution Units
File	Release Date	Used with these products
MIB Files	1-21-2013	P/N 356XX- and 358XX-series Monitored and Controlled PDUs
Serial Access Program*	10-25-2010	P/N 356XX- and 358XX-series Monitored and Controlled PDUs

 

IP KVMs
File	Release Date	Used with these products
Console Setup Software	11-11-2011	IP KVM Switch with Cat 5/6 Ports IP KVM Switch with DB15 Ports

 

Remote Infrastructure Management (RIM)
File	Release Date	Used with these products
RIM-1000 Firmware **	7-14-2014	RIM-1000
RIM-1000 MIB	7-14-2014	RIM-1000
RIM-750 Firmware	Automatically downloaded by device.	RIM-750
Protocol Converter Firmware	7-14-2014	RIM Protocol Converter
Protocol Converter MIB	7-14-2014	RIM Protocol Converter

*Serial Software allows you to access, configure, monitor and control select PDUs using a direct serial connection to a computer. Use the RJ-45 to DB-9 Serial Setup Cable (P/N 35941-131) to connect the PDU and computer. Note that PDUs manufactured after September 1, 2009 can be configured using a java-enabled web browser instead of the serial setup.

**Please contact Technical Support at 800-834-4969 prior to installing the RIM-1000 Firmware.