Your Cart (0)

Your cart is empty.

Cart Subtotal:

In order to provide complete functionality, this web site needs your explicit consent to store browser cookies. If you don't allow cookies, you may not be able to use certain features of the web site including but not limited to: log in, buy products, see personalized content, switch between site cultures. It is recommended that you allow all cookies.
I hereby accept that the provided information can be used for marketing purposes and targeted website content.

You can find more information on our privacy page.
Smoke Detector for RIM-1000
Smoke Detector for use with RIM-1000 System; each
Póngase en contacto con un representante de ventas

Smoke Detector for RIM-1000 Descripción General

Surface-mount, wired, photoelectric smoke detector with two-piece construction that allows pre-wiring of the installation base with plug-in head. Smoke Detector requires external power from RIM-1000 or an external power supply and attaches to one of the digital inputs on the RIM-1000.

Key Features and Benefits

  • Input Power: 12/24V non-polarized (nominal); 8.5V (minimum); 35V (maximum); (order a power adapter separately)
  • Maximum Ripple Voltage: 30% peak-to-peak of applied voltage
  • Standby Current: 50μA maximum average
  • Sensitivity: 2.5%/ft nominal
  • Alarm Contact Ratings: 0.5A @ 30V AC/DC
  • Maximum Alarm Current: 20mA @ 12V, 23mA @ 24V
  • Operating Temperature Range: 32°F to 120°F (0°C to 49°C)
  • Operating Humidity Range: 0 to 95% RH, non-condensing
  • LED indicators: Red and Green indicate power up, normal, out of sensitivity, and alarm conditions
  • Mounting: 3.5” octagonal back box, 4” octagonal back box, single-gang back box, 4” square back box with a plaster ring, direct mount to ceiling/wall
  • Input Terminals: 14 to 22 AWG
  • Size: 2.0”H x 5.3” diameter (51 mm x 127 mm diameter)
  • Weight: 6.3 oz (178 g)
  • Material: Housing, plastic
  • Color: White
Ver Documentación del Producto