Industrial Enclosure Accessories

To truly make the most of your Chatsworth Products Industrial Enclosure, CPI provides a variety of value-added accessories to complement its functionality and ease of use.
Resources
Browse Accessories (0 Products)

Plinth Base is a structural mounting base that creates a lift, which can be used to service and route cables through the bottom panel of the enclosure.

72 options
Starting at $380.31 USD MSRP
Closed-Loop Cooling isolates the external ambient air from the internally conditioned air, eliminating the risk of contaminants entering the enclosure.
 
4 options
Starting at $4,503.75 USD MSRP
AC Door Assembly for RMR Modular Enclosure has a cutout near the middle for a Cooling Unit.
48 options
Starting at $470.54 USD MSRP

Intake Door Assembly for RMR Modular Enclosure for Filter Fan or Filter Kit.

48 options
Starting at $470.54 USD MSRP

Tapped #12-24 Equipment Rails for RMR Modular Enclosure

24 options
Starting at $532.72 USD MSRP

Equipment Mounting Rails attach directly to frame of the enclosure or to optional front-to-rear horizontal support slides, and support 19”EIA (482.6 mm) rack-mount equipment. Equipment Mounting Rails can be ordered with the enclosure.

24 options
Starting at $532.72 USD MSRP

The LED Light Kit with Magnet Mount, Motion Sensor, provides additional lighting inside the enclosure.

1 option
Starting at $465.61 USD MSRP

Aluminum Mesh Filter Kit for DTS 3021 Cooling Unit

1 option
Starting at $62.26 USD MSRP

Use natural convection with filter kit when the amount of heat being removed from your enclosure is minimal. Filters can be used in either intake (when combined with Filter Fans) or exhaust applications (ideal).

4 options
Starting at $87.55 USD MSRP
Fixed Mounting Plates are solid metal panels that are installed in a side-to-side orientation at the rear of the enclosure onto the back of the frame and can be ordered with the enclosure.
 
72 options
Starting at $145.86 USD MSRP

Baying brackets attach two RMR Modular Enclosures together side-by-side. Includes 4 flat baying brackets.

2 options
Starting at $117.56 USD MSRP
Short Finger Cable Manager is a T-shaped cable guide that creates a pathway for cables next to the rail for better organization. Use it with Front-to-Rear Lashing Bracket for optimum performance.
 
36 options
Starting at $143.74 USD MSRP

Quarter-Height Mounting Plates are solid metal panels that can be mounted in multiple orientations–front-to-rear or side-to-side–directly to the uprights of the frame.

108 options
Starting at $112.50 USD MSRP

Use CPI Filter Fans to propel the cool ambient air into the enclosure. For intake fans, once installed, a slight positive pressure builds up inside the cabinet, so that only air filtered by the Filter Fans flows into the enclosure. 

8 options
Starting at $283.69 USD MSRP
Lag Bolt Mounting Kit includes (6) M8 x 40 mm Lag Bolts and Sealing Washers for attaching the enclosure to a plywood back board.
 
1 option
Starting at $114.07 USD MSRP

The Swing-Out Plate Mounting Kit installs at the front of the enclosures and converts a standard mounting plate into a swing-out mounting plate (ordered separately). The Kit includes brackets, hinges and mounting hardware that attach to the front of th

6 options
Starting at $87.00 USD MSRP
Adjustable Mounting Plates are solid metal panels that attach in a side-to-side orientation in the middle section of the enclosure and can be adjusted in depth by one-inch increments and are ordered as accessories.
 
72 options
Starting at $172.51 USD MSRP

The LED Light Kit with Magnet Mount, On/Off Switch, provides additional lighting inside the enclosure.

1 option
Starting at $335.73 USD MSRP

Baying Kits attach, or bay, two RMR Modular Enclosures together side-by-side.

2 options
Starting at $117.56 USD MSRP

Ring Cable Manager is a ring-shaped cable guide that creates a separate vertical pathway for cables, independent of the equipment mounting rails.

24 options
Starting at $240.10 USD MSRP
Busbar Kit includes a 19”L (482.6 mm), 3/4”H (19.1 mm), 3/16” thick (4.8 mm) hard-drawn electrolytic tough pitch 110 alloy copper bar with eight #6-32 tapped lug mounting holes on 1” (25.4 mm) centers, two insulators and mounting hardware. Attaches to the RMR Wall-Mount Enclosures on the back panel and provides a common bonding point.
 
1 option
Starting at $104.06 USD MSRP
Use CPI Filter Fans to propel the cool ambient air into the enclosure. The patented click mechanism on the Filter Fans have a unique four-corner fastening system that enables safe and quick, tool-less installation, maintains the rated seal, and allows the filter medium to be replaced in seconds.
10 options
Starting at $74.57 USD MSRP

Use CPI Filter Fans to propel the cool ambient air into the enclosure. The air propelled into the cabinet displaces the warm air which exits through the exhaust filter. 

8 options
Starting at $299.92 USD MSRP

RMR Enclosure XL Polyvent Protective Vent Kit provides ventilation and equalizes air pressure in the event of drastic temperature changes. Pressure equalization is essential to protect the enclosure seal from damage. Installation hardware included.

1 option
Starting at $88.53 USD MSRP
Vertical Cable Lashing Bracket creates a simple, separate vertical pathway for a small bundle of cables and has multiple slots for CPI Saf-T-Grip® Straps or tie wraps to secure cables to the bracket.
 
35 options
Starting at $126.20 USD MSRP

Cable Lashing Bracket creates a simple, separate vertical pathway for a small bundle of cables and has multiple slots for CPI Saf-T-Grip Straps or tie wraps to secure cables to the bracket. 

12 options
Starting at $133.32 USD MSRP

Finger Cable Manager is a T-shaped cable guide that creates a pathway for cables next to the 19”EIA (482.6 mm) equipment mounting rails and guides cables into each U space. Wider configurations also feature a protective cover.

24 options
Starting at $195.48 USD MSRP

The Mounting Bracket Kit mounts RMR Standard Wall-Mount Cabinets to the wall.

3 options
Starting at $79.28 USD MSRP

Equipment Mounting Rails provide support for 19” EIA (482.6 mm) rack-mount equipment and can be ordered with the enclosure

108 options
Starting at $68.00 USD MSRP

Replacement Door Latch Kit for RMR Wall-Mount Enclosures. Order latch separately.

3 options
Starting at $50.96 USD MSRP

Exhaust Door Assembly for RMR Modular Enclosure for 7" (177 mm) Filter Fan or Filter Kit

48 options
Starting at $470.54 USD MSRP

Finger Cable Manager is a T-shaped cable guide that creates a pathway for cables next to the 19”EIA (482.6 mm) equipment mounting rails and guides cables into each U space. 

12 options
Starting at $195.48 USD MSRP

Short Ring Cable Manager includes a set of four 7U high brackets that create a pathway for cables next to the 19”EIA (482.6 mm) equipment mounting rails.

2 options
Starting at $76.84 USD MSRP

Full-Height Dual PDU Mounting Bracket supports two vertical PDUs side-by-side and has multiple slots for CPI Saf-T-Grip Straps or tie wraps to secure cords to the bracket.

8 options
Starting at $171.93 USD MSRP
ComSeal by Roxtec is a light-weight and efficient cable-sealing solution for industrial enclosures. The solutions are supplied as readymade kits, including adaptable sealing modules, which simplify planning, purchasing and installation. The seals can be attached to either the inside or the outside of an enclosure. This compensates for interfering equipment in cramped spaces and makes installation easy.
 
4 options
Starting at $183.28 USD MSRP
The Single Solid Metal Door is reversible to open from the right or left and can be attached to the front or rear of the enclosure. To reverse doors, you must move the hinges, and rotate the latch. Door includes hinges. Order latch separately.
 
72 options
Starting at $445.85 USD MSRP
The Single Tempered Glass Door is reversible to open from the right or left and can be attached to the front or rear of the enclosure. To reverse doors, you must move the hinges, and rotate the latch. Door includes hinges. Order latch separately.
 
72 options
Starting at $500.44 USD MSRP

Leveler Kit attaches to the bottom of the enclosure if not using a plinth base. Includes four levelers with M10 threaded stems and swivel pads to help compensate for height differences in floor irregularities and jam nuts.

1 option
Starting at $59.86 USD MSRP
RG M63–gland seals by Roxtec, combine the traditional gland technique with unique technology for flexibility and adaptability. The result is a new generation of glands with improved capacity and functionality. RG M63 has a compact design that makes it well suited for small areas. It can seal between one to nine cables with diameters ranging from 0.138" to 1.280".
 
2 options
Starting at $157.70 USD MSRP

The RMR Enclosure Threaded Drain Plug Kit prevents accumulation of condensed water by allowing it to drain out the bottom of the enclosure. The drain plugs also vent air out of the enclosures, helping to equalize air pressure. 

1 option
Starting at $121.27 USD MSRP

Full-Height Mounting Plates are solid metal panels that are installed in a side-to-side orientation of the enclosure frame. 

216 options
Starting at $416.63 USD MSRP
When NEMA Type 12 and IP 55 protection ratings are not essential, Brush Cable Entry Grommet helps block some dust and particles from entering through cable access holes, while providing easier access to cables. Place grommets at the bottom openings for optimum protection.
 
5 options
Starting at $199.81 USD MSRP

Full-Height Baying Mounting Plates are installed between two Full-Height Mounting Plates when enclosures are bayed (attached side-by-side). This creates a continuous mounting surface, connecting the two Full-Height Mounting Plates.

12 options
Starting at $208.31 USD MSRP

Half-Height Dual PDU Mounting Bracket supports two vertical PDUs side-by-side and has multiple slots for CPI Saf-T-Grip Straps or tie wraps to secure cords to the bracket.

4 options
Starting at $154.72 USD MSRP

RMR Enclosure Door Stop Kit The RMR® Enclosure Door Stop Kit secures the door of the enclosure in the open position. It can be mounted on either left- or right-hinged doors. Includes mounting hardware.

 

1 option
Starting at $208.82 USD MSRP
The fluted filter mat's folded structure provides airflow and maintains the required NEMA Type 12 protection, while also extending the filters lifetime 300 percent longer than conventional filters.
 
1 option
Starting at $77.82 USD MSRP

Bracket Kit is an alternate method for mounting the Full-Height Mounting Plate. It positions the plate at the very back of the enclosure in a fixed position inset into the rear opening of the frame. 

2 options
Starting at $145.86 USD MSRP

Designed to isolate the external ambient air from the internally conditioned air eliminating the risk of contaminants entering the cabinet. Attaches to the outside of the AC Door Assembly or the outside of the Side Panel Assembly.

8 options
Starting at $5,534.84 USD MSRP
Hardware Kits are used to attach plates, rails and accessories to the RMR Modular Enclosure frame. The interior of the frame is punched with attachment points on 1" (25 mm) increments. Traditional thread-forming screws allow direct attachment to the frame. Drop-in bolts and nuts speed installation and still provide a bonded connection.
 
1 option
Starting at $22.31 USD MSRP
Replacement gland plates feature allows pre-existing wiring or equipment to be installed in the cabinet.
 
10 options
Starting at $143.25 USD MSRP
Filters can be used in either intake (when combined with Filter Fans) or exhaust applications (ideal).
 
1 option
Starting at $27.56 USD MSRP
Front to Rear Cable Lashing Bracket routes high volumes of cables from front-to-rear of the cabinet, preventing cabling from invading the U space below the cable run.
 
5 options
Starting at $118.00 USD MSRP
RMR Quick Wall-Mounting Kit features a cleat design that allows for quick and easy mounting of the RMR Wall-Mount Enclosure.
 
10 options
Starting at $341.21 USD MSRP

The RMR Enclosure Grounding and Bonding Kit provides bonding to the enclosure or bonds the optional mounting plate.

1 option
Starting at $56.42 USD MSRP

Front-to-Back Rear Cable Lashing Bracket routes high volumes of cables from front-to-rear of the RMR Fixed Wall-Mount Enclosure, preventing cabling from invading the U space below the cable run.

6 options
Starting at $118.00 USD MSRP
Snap-In Liquid Tight Grommet keeps liquids from leaking through cable openings.
 
1 option
Starting at $11.45 USD MSRP

Baying Kits attach, or bay, two RMR Modular Enclosures together side-by-side.

2 options
Starting at $329.89 USD MSRP

Half-Height Mounting Plates are solid metal panels that can be mounted in multiple orientations–front-to-rear or side-to-side–directly to the uprights of the frame. The 23.6"W (600 mm) plates can also be mounted directly to 19”EI

108 options
Starting at $243.72 USD MSRP
Order one Power Cord per Filter Fan Kit. Match to Fan Voltage requirement.
 
3 options
Starting at $32.87 USD MSRP

Baying brackets attach two RMR Modular Enclosures together side-by-side. Includes 8 external baying brackets.

2 options
Starting at $163.31 USD MSRP

Baying brackets attach two RMR Modular Enclosures together side-by-side. Includes 8 external baying brackets.

2 options
Starting at $116.62 USD MSRP
Use Top Exhaust Filter Fan Kit with two Intake Filter Kits. All kits should be the same size.
 
1 option
Starting at $940.31 USD MSRP

Ground Wire Kit includes jumpers and hardware to bond the enclosure frame, panels and doors.

4 options
Contact us for pricing.

Document Holder attaches to the enclosure with double backed adhesive tape.

4 options
Starting at $139.12 USD MSRP

Front-to-Rear Horizontal Support Slides are used with equipment rails. Includes six slides.

18 options
Starting at $534.84 USD MSRP
Match Power Cord to Cooling Unit voltage requirement. 
3 options
Starting at $42.52 USD MSRP