Used to attach Vertical PDUs to CPI Rack Systems; supports (1) PDU
Adding power to a cabinet, CPI’s QuadraRack or any other EIA standard rack product is a breeze. The Universal Cabinet/QuadraRack Vertical Power Strip Bracket enhances the flexibility of the Versa-clamp.
Used to attach PDUs to mounting brackets or power managers. Includes two buttons and screws.
Tool-less Mounting Hardware Kit, Pack of 2, for use with eConnect power products
Input power cords for use with eConnect® PDUs that have IEC C20 inlets.
PowerScope In-Line Meter lets you upgrade basic and metered PDUs with an in-line current meter that features network-based current monitoring to help you track where and when power is used.
Environmental probe that includes a temperature and humidity sensor for use with PowerScope In-Line Meter. RJ11, 5'6"L (1.7 m) Cord
Use eConnect EAC Door Sensor Kit to generate output signals for remote access monitoring.
Use eConnect EAC Wire Harness Kit as a spare if you need to connect the EAC with eConnect PDUs.
13.56 MHz MIFARE smart cards for cabinet access.
Wall-mount temperature and humidity sensor with 3% accuracy for relative humidity accuracy, switch selectable temperature monitoring range and switchable relative humidity or dew point measurement. This sensor requires external power from RIM-1000 or a
Wall-mount temperature and humidity sensor with 3% accuracy for relative humidity accuracy, a three-digit LCD display, switch selectable temperature monitoring range and switchable relative humidity or dew point measurement. This sensor requires extern
Use IP KVM Dongles to connect computers to the IP KVM Switch Cat 5/6 ports with Cat 5/6 cables (ordered separately).
Power Fail Monitor plugs into a standard 120 VAC NEMA 5-15 outlet to monitor for power loss. Secures to the outlet to ensure it is not accidentally disconnected and signals power loss through a Form C output relay.
Use J-Clips to install Leak Detection Sensor Rope. J-Clips are constructed of durable nylon with an adhesive backing for easy and secure installation..
The Magnetic Door Sensor is a surface-mounted, wired, magnetic proximity sensor used to detect when a door is opened and closed or when a cover panel is attached or removed. The Magnetic Door Sensor is designed for quick and easy installation as well a
Leak Spot Detector is used to detect liquid in a specific spot, such as, inside of a condensation drip pan. The Spot Detector features a small enclosure with adjustable probes. It can be attached to a flat surface and submerged in water. Leak Spot Dete
Internal Modem for the RIM-1000, for pager and PPP/dialup connections
Expansion Cards for the Remote Infrastructure Management (RIM-1000) System
RIM, Leak Detection Controller Kit, 10ft Sensor Rope, J-clips, 5VDC Power Supply, 6'' (152 mm) W x 4'' (102 mm) D x 2.3'' (57 mm) H
The Motion Detector is a surface-mounted, wired, passive infrared motion detector designed for wall-to-wall coverage across a wide temperature range. When wall-mounted around 10 feet (3 meters) high, Motion Detector covers a cone-shaped area with a max
Surface-mount, wired, photoelectric smoke detector with two-piece construction that allows pre-wiring of the installation base with plug-in head. Smoke Detector requires external power from RIM-1000 or an external power supply and attaches to one of th
RIM-1000 includes brackets for rack-mounting the device into a 19”EIA rack or cabinet, but wall-mount brackets are also available if you wish to hang the RIM-1000 on a wall.
Leak Detection Lead Cable is used to attach Leak Detection Sensor Rope to the single leak detection input on the RIM-750. This kit
includes a 15’L (4.57 m) cable that connects the RIM-750 to the Leak Detection Sensor Rope and an End-of-Lin
Rack-Mount Bracket for RIM-750
Surface-mount, wired, photoelectric smoke detector with two piece construction that allows pre-wiring of the installation base with plug-in head.
Use the Temperature and Humidity Sensor to take temperature and humidity measurements close to the RIM-750. The Temperature and Humidity Sensor attaches to one of the four Temperature/Humidity inputs on RIM-750.
Use the Temperature Sensor to take temperature measurements close to the RIM-750. The Temperature Sensor attaches to one of the four Temperature/Humidity inputs on RIM-750.
PowerScope and PDU Signal Cable is a proprietary cable used for initial setup with PowerScope In-Line Meter or Power Distribution Units (PDUs).
Use RF IDeas EAC Smart Card Reader for programming eConnect EAC Smart Cards or any other existing smart cards.
Use the Cascade Cable to connect two switches together for expansion. Computers connected to both switches will be viewed through one set of peripherals. Each Cascade Cable has a combination DB-15 connector on each end.
The Sensor Rope detects the presence of water. The Sensor Rope is constructed of a strong, durable, non-conductive polymer to reduce false alarms, while remaining highly flexible for easy placement around equipment. Sensor Ropes attach to the RIM-750 t
Cord Retention Tethers are used with cable ties to secure power cords next to C13 and C19 outlets and to C20 power inlets. The tethers snap onto a small stud next to each outlet/inlet on the PDU. Order cable ties separately.
Ground Wire Kit, 7"(178 mm) L x 1"(25mm) H x 1"(25mm) W
Attaches to the USB port on eConnect PDU or Network Controller Module