Kit includes three Fixed Accessory Panels for the Evolution g1 Single-Sided Vertical Cable Manager. Select to match the width of the cable manager; includes installation hardware.
Floor Bracket secures the base of the Evolution Vertical Managers to the floor when located at the end of a row of equipment racks. Light-duty, steel bracket with attachment hole sized 1/4" hardware
Use these kits to increase the load bearing capacity of the Standard Swing Gate Wall Racks to 150 lb.
Designed to support heavy cable runs, such as multiple PBX cable, IBM® cabling and more.
Mid Panel Kit for Motive® Double-Sided Vertical Cable Manager
Kit includes three Movable Mid-Sections for the Evolution g2 Double-Sided Vertical Cable Manager. Select to match the width; includes installation hardware.
Panel Adapter with Cable Management manages cable along the entire length of the rack.
Prevents back-and-forth, side-to-side and up-and-down movement of shelf-mount equipment.
Improves appearance and prevents the accumulation of dust and debris at the rack base.
Improves the appearance of QuadraRack 4-Post Frame and prevents the accumulation of dust and debris at the base.
Rack Panel Adapters allow 19"W equipment to be mounted on 23"W or 25"W racks.
Rear Panel Kit for Motive® Single-Sided Vertical Cable Manager.
Solid, steel side panel for use with Adjustable Rail QuadraRack or Adjustable Rail ServerRack to cover the end of the rack and or vertical cable managers at the end of a row.
Side Panel Kit for Motive® Vertical Cable Manager.
The Slip-On Cover is used on the Large Horizontal Ring Panel.
Used for easy and space-saving mounting of standard 110D Type Wiring Blocks (not included).
Covers and divides the front and rear of the Evolution® g2 Double-Sided Vertical Cable Manager. Easy installation; attaches to the back of the Movable Mid-Sections inside the manager.
Encloses the rear of the Evolution® g1 Single-sided Vertical Cable Manager. Hangs from the top of the manager or attaches to the back of the Fixed Accessory Panels.
Covers the side of an Evolution® g2 Double-Sided Vertical Cable Manager located at the end of a row of equipment racks. Easy tool-less installation; hangs from the top of the manager and attaches at the bottom of the manager with included snap-in hardware.
These "L" brackets mount to the back of the rack channel to provide a convenient point to tie-down cable runs.
Protect and secure your valuable shelf-mounted equipment.
Designed to be used on narrow and wide Vertical Cabling Sections to provide a clean, professional appearance. Available in metal or plexiglass versions; plexiglass for 7' (2.1m) only; in sizes to fit your installation.
Attach CPI Vertical Cabling Section (VCS) Offset Mounting Bracket Kit to the side of the Seismic Frame® Two-Post Rack for proper alignment.
Designed to support heavy cable runs, such as multiple strand PBX cable, data cabling and coax, along walls or wherever wall support of heavy cable runs are needed.